How to create a QoS Rule for an IP or specific port

QoS custom Rule for an IP 

First, create a bypass rule for the device in question.

1. Navigate to Config > Network > Bypass Rules and click the Add button.
   
   
2. Give the rule a description that is helpful in identifying what device is being bypassed.  In this example we are bypassing an internal email server at 192.168.1.10 so we named the rule Email Server Bypass.  
   
   
3. Click the Add button in the "Conditions" section. Select the Source Address is option and then enter the IP of the device in question.  
   

Now that the device is bypassed we can set up custom QoS Rules for the device. 

1. Navigate to Config > Network > Advanced > QoS > QoS Rules and click on the Add button found in the QoS Custom Rules section of this page.
   
   
2. Give the rule a description that is helpful in identifying what device is being given a new QoS priority.
   
   
3. Click the Add button in the "Conditions" section. Select the Source Address is option and then enter the LANIP of the device we just created the Bypass Rule for.
   
   
4. Now select the Priority you would like to give the device in question.
   
   
   

QoS Custom Rule for a port 

First, create a bypass rule for the port in question.  

1. Navigate to Config > Network > Bypass Rules and click the Add button.  
   
   
2. Give the rule a description that is helpful in identifying what port traffic is being bypassed.
   
   
3. Click the Add button in the "Conditions" section. Select the Destination Port is option and then enter the destination port number into the Value field. 
   

Now that the port in question is bypassed, we can set up custom QoS rules for the device.  

1. Navigate to Config > Network > Advanced > QoS and then click on the Add button found in the QoS Custom Rules section of this page.
   
   
2. Give the rule a description that is helpful in identifying what port traffic is being bypassed.
   
   
3. Click the Add button in the "Conditions" section. Select the Destination Port is option and then enter the destination port number into the Value field.
   
   
4. Select the Priority you would like to give the destination port traffic in question.