Configuring custom QoS Rules

Overview

QoS custom Rules are used to assign a particular QoS priority to a subset of bypassed traffic, such as a specific IP address or port.

Note that QoS custom rules only apply to bypassed traffic. Thus, the first step in creating custom QoS rules is to ensure the traffic is bypassed: How to bypass traffic from filtering

Creating a custom QoS Rule for an IP address

1. Navigate to Config > Network > Advanced > QoS > QoS Rules and click on the Add button found in the QoS Custom Rules section of this page.
   
   
2. Give the rule a description that is helpful in identifying what device is being given a new QoS priority.
   
   
3. Click the Add button in the "Conditions" section. Select the Source Address is option and then enter the LANIP of the device we just created the Bypass Rule for.
   
   
4. Now select the Priority you would like to give the device in question.
   

Creating a custom QoS Rule for a port 

1. Navigate to Config > Network > Advanced > QoS and then click on the Add button found in the QoS Custom Rules section of this page.
   
   
2. Give the rule a description that is helpful in identifying what port traffic is being bypassed.
   
   
3. Click the Add button in the "Conditions" section. Select the Destination Port is option and then enter the destination port number into the Value field.
   
   
4. Select the Priority you would like to give the destination port traffic in question.